Produktinformationen "Salsa Cutthroat Carbon MTB Rahmenkit - 29", black, 2025"
Salsa Cutthroat Carbon MTB Rahmenkit - 29", black
Das Salsa Sutthroat ist ein einzigartiges Bike für " Ultra-Endurance Mixed Surface / Tour Divide - inspired / Bikepacking" Einsätze.
FRAME SPECS
- Design Wheel x Tire Size
- 29 x 2.25" (29 x 2.4" Max) (Some front derailleurs may reduce tire clearance. Check manufacturer’s specifications to confirm clearance before installing.)
- Susp Fork Length (Travel)
- 506 mm (100 mm Travel)
- Rigid Fork Length
- 483 mm
- Fork Offset
- 51 mm
- Front Spacing
- 110 x 15 mm Thru-axle
- Front Brake (Rotor)
- Flat mount (160–180 mm), flat mount frame standard (35 mm thickness), 42 mm bolt length
- Front Rack Mounts
- Yes, lowrider compatible. Salsa Down Under rack recommended.
- Fork Accessory Mounts
- Yes, one set of Three-Pack mounts on each fork leg
- Headset, Upper
- IS41
- Headset, Lower
- IS52
- Seatpost
- 27.2 mm
- Seat Collar
- 32.0 mm
- Dropper Compatible (Routing)
- Yes, internal
- Front Derailleur Type
- Road, braze-on, 2x, bottom-pull
- Bottom Bracket
- Press Fit BB92, 41 x 92 mm
- Crankset (Max & Min Ring)
- 1x MTN Boost: 40t Max; 2x RD Boost outer ring: 46–50t, inner ring: 30–36t *Oval chainrings subtract 2t from max*
- Rear Brake (Rotor)
- Flat mount (140–160 mm), flat mount frame standard (25mm Thickness), 32 mm bolt length
- Rear Spacing
- 148 x 12 mm Thru-axle
- Rear Axle Size
- M12 x P1.0 x 175
- Derailleur Hanger
- SRAM UDH
- Rear Rack Mounts
- Yes, Salsa Rack Lock seatpost collar required. Salsa Wanderlust Rack recommended. Salsa Bent Rack Struts (part #RK8030) required for installation on 58 cm and 60 cm frames. Not compatible with Salsa Wanderlust HD Rack
- Rear Fender Mounts
- n/a
- Water Bottle Mounts
- Frames up to 54cm: 2 in main triangle. Frames 56cm and larger: 3 in main triangle.
- Under Downtube Mount
- Yes, two pair.
- Top Tube Mounts
- Yes, compatible with Salsa Top Tube bag.
- Internal Dropper Post Routing
- 1x mechanical drivetrain: Route the dropper post cable through the drive side of the down tube. Di2 drivetrains: Mount the Di2 battery in the seatpost, then route the dropper post cable through the drive side of the downtube.
- External Dropper Post Routing
- 1x and 2x mechanical and Di2 drivetrains:Route the dropper post cable through the dynamo rear light holes on the non-drive side of the top tube.
Size 52cm 54cm 56cm 58cm 60cm A. Effective Top Tube 520 540 560 580 600 B. Stand Over 700 742 811 852 874 C. Reach 357 372 385 394 406 D. Stack 585 592 620 645 664 E. Total Seat Tube Length 356 419 508 559 584 F. Headtube Length 90 98 127 154 175 G. Headtube Angle 69 69 69 69 69 H. Seat Tube Angle 74.5 74.25 74.25 74 73.75 I. BB Drop 70 70 70 70 70 J. BB Height 300 300 300 300 300 K. Chainstay Length 445 445 445 445 445 L. Fork Length Axle to Crown 483 483 483 483 483 M. Fork Offset 51 51 51 51 51 N. Wheelbase 1050 1066 1091 1110 1129 Crank Arm Length 165 170 175 175 175 Handlebar Width 440 460 480 500 520 Recommended Rider Height 154cm–168cm 168cm–175cm 173cm–185cm 183cm–193cm 190cm–UP Stem Length 60 70 80 80 90 Measurements based on:
- an 483mm AC x 51mm offset fork which is equivalent to an average 100mm 29" suspension fork at 25% sag
- a 29" x 2.2" tire measuring 740mm in diameter
- Standover for all sizes is measured vertically to top of toptube from a position 50mm forward of BB center
Weiterführende Links zu "Salsa Cutthroat Carbon MTB Rahmenkit - 29", black, 2025"
Zubehör
